Seen In: The Washington Post - Weekly "Blog Watch"
LA Times - "an ever inspiring blog"
 |  |  |  |
Entries in Kitchen Countertops (3)
Granite Kitchen Countertops 1+1 = ?
Here's an interesting question about a countertop from Meg...
"I have a dark green granite table that I am moving into a new house. It matches my current kitchen counter. The kitchen counter in the new house, although not yet chosen, will NOT match the uba tuba granite of the table. Should I sell this table? How can I incorporate a table with a different granite from my counter into my new decor?
My first reaction is that it appears to be assumed that you will be selecting another GRANITE countertop. It also assumes that you can't have enough granite, that you really love it. If that is the case, you are entering an advanced countertop selection process zone! Blending two granites is possible, but must be done with great care.
The easy way, of course, is to pair Uba Tuba with a Black Impala, a solid black granite. Easy, done, perfect. But, what if you don't like black?
Then, you must begin to be aware of two things: color and grain pattern.
Color, that's easy. I'd recommend looking for a granite with a very different color. Too close to what you have, and the grain patterns can get confusing. At least the color is a start at differentiating your countertops...successfully.
Pattern is a different issue. Granites have such a variety of patterns. Some granites have movement, some have large chips of pattern, some have tight grain. A very tightly grained granite can have a more contemporary look in many cases. That said, how far apart your granites are will also be a factor in what goes with what and why. In general, be aware that the overall effect will be more busy, than more calm and simple,due to the expanses of grain.
In the upper most image, the raised, light, countertop, has a more distinct grain pattern. The lower, darker, surface, has a somewhat tighter grain pattern, but not super tight. Beyond this image, across from the island the countertop is dark, surrounding the cooktop and it is light surrounding the main sink area.
That all said, above, forget everything I said. Sometimes, in a rare occasion, you can find two granites in a similar color which simply work together. I wish I had better images, but this project is a great example. Although the island looks busy too, in real life, the island looks quite consistent and the perimeter granite looks substantially more strongly patterned, and they work well together. It was important to my client to have an interesting granite pattern on the island, not just something with very tight grain, and with lots of time spent looking, we found the right combination.
Of course, Meg, you may want to consider an alternative, more quiet, surface, other than granite, to "feature" your granite table in a more focused way, especially if you love your table. But, if it's granite you love, and want for your coutnertop, here's how to do it.
Susan Serra, CKD
in Kitchen Countertops
|
12 Comments
| 
Email
Granite Countertops & Samples
In my neck of the woods, my whole region it seems, it's like the granite yards all got together and said "No more samples!" Previously, they'd have a system where we'd tell the guy with the hammer which slabs we'd like samples of, and with the knock of the hammer, we get a few samples. We would bring our cabinet samples to the granite yard, get the granite samples, and be easily able to select other materials for the renovation.
When my client recently told me that she selected her granite one day, when she had gone without me (gasp!) she said that she loved it, she wanted it, and she wanted me involved in the purchase, templating, details, and logistics. Today, I went to the granite yard to give the fabricator a deposit and to see the granite my client chose.
Having forgotten my camera at the office, I decided to take a bunch of pictures with my cell phone for her (she wasn't with me.) I came back to the office, uploaded the photos to her nearest CVS to make prints from, and left her a message that she should go pick them up and "waa laa" she now has a reminder of her granite. I was happy to have thought of that solution!
Lesson: Take your camera everywhere!!!
Susan Serra, CKD
in Kitchen Countertops
|
4 Comments
| Email
Kitchen Countertops - Slate, Yes, Slate!
Slate is the quiet, little known, but serious, player in countertops for kitchens! Of course, slate is traditionally seen as a building material for flooring, roofing, cladding on buildings, wherever there is a need for a very strong, solidly performing material. So, why not kitchen countertops? I'll warn you in advance...mention slate to people in the biz, including countertop fabricators, and most likely you'll get, "No way, slate will stain and is too porous!" It could be followed by "You're nuts!" While I've been accused of being nuts on numerous occasions, it doesn't apply to this situation. Trust me...
Rarely marketed to kitchen and bath designers for some reason, slate is, perhaps, one of the strongest, if not the strongest, materials one can use as a kitchen countertop, even exceeding the properties of granite. Slate, as a countertop material, has numerous properties that we need in a hard working countertop surface. And, by the by, I'm VERY conservative in terms of recommending countertop surfaces to my clients. Countertops are expensive, permanent, materials, not to be taken lightly by a specifier. I don't. Slate works!
Color
Slate is available in a variety of colors. Mostly understated, in middle to dark tones, the colors of slate are generally seen as:
- Red
- Deep Purple
- Deep Purple/Turquoise Combination
- Turquoise
- Gray
- Black
The look is quiet, elegant, strong, simplistic, nature-like, minimalist, dependent on its application within the room. Slate is almost always honed, although it can be oiled for a slightly more glossy look.
Pattern/Graining
Depending on the variety of the slate, the grain type and pattern can vary. Some slates, as Black Lace, has a distinctive highly textural, high-style look. Other slates exhibit very little graining whatsoever. Others are mottled. Some are quiet, with little graining, except for one strong, localized grain pattern, running through the slate, for a look of pure, natural beauty! Graining pattern/direction/type cannot be predicted. Unless you want to schlep to the factory in New England, pick out your own slabs and tell them where to cut and where not to cut. Short of that, pictures of existing installations should prove to be a good guide.
Edging
Typically, slate edges are simple square edges with a very small radius top and bottom. Variations could be any edge one would see in granite. Due to the understated look, slate is not often seen with an ogee (OG) edge. Slate is perfect for a rough cut, exposed, edge. Perfect for today's uber-rustic-eco aesthetics.
Properties
One of the best properties of slate is its extremely low absorption rate, lower than granite. Designers can consider most slates as being stain-free. I have performed testing on the turquoise/green colors and have found these slate colors to be stain-free. Slate in the gray/black family may need a sealer. As a result of slate's low absorption, the material can be considered anti bacterial in nature and totally eco friendly.
Some slates (and partially-metamorphosed “mudstones” which are incorrectly called slates) are significantly weaker, than the slates I am talking about and are more absorptive, softer and prone to delamination and “self-splitting”. The slates that are good for countertops are found in the New England region.
Slab material generally is available in smaller sizes than granite, resulting in an additional seam or two. You should pay attention to seaming issues. Have your designer take a close look at how best to put the pieces together according to your cabinet plan.
Care
Soap and water, or even a tough cleaning product such as Fantastic can be used. If a sheen is desired, use a diluted solution of Murphy's Oil Soap and water. Apply, and buff off before it dries.
Scratches are easily removed, simply, with a sponge, during normal cleaning of the countertop. Deeper scratches are easily rubbed out with wet steel wool. Small white scratches are fairly typical to see during use over time, but are easily wiped clean during the day, if you see them at all.
Really only the gray and black stones need to be sealed as they are more absorptive in nature than other colored slates. Thus, mild soaps only should be used on these colors, so as not to strip the sealer. I usually get samples and then do a whole "food stuffs" test over a 24 hour period, beat it up in other ways and then evaluate.
I really love slate. It's eco friendly, it feels like butter to the touch, it's understated and fits many design aesthetics. I can't wait till I use it again for a project. Never had a client complain once installed, and I've installed quite a few slate countertops, only raves. And, THAT'S the test!
Susan Serra, CKD
in Kitchen Countertops
|
26 Comments
| Email